Regenerative Type: | Heat Energy Type |
---|---|
Indirect Type: | Reforming Type |
Electrolyte: | Alkali Type |
Working Temperature: | <100°C |
Fuel Type: | Hydrogen Oxygen Fuel Cell |
Generation: | Pemfc |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Proton exchange membrane is the first domestic two-side radiation ducting process
Product with high tensile strength, isotropic, high conductivity, good chemical properties, and other advantages, but also has the effect of self-humidification
It has high mechanical strength, low well ingrate and
high moisture content
It is suitable FOR solid electrolyte separators in FUEL CELL, vanadium cells, electrolytic cells, electrodialysis, gold salt preparation, amino acid refining, and electrochemical sensor
Thickness | ( μm) :80±3 |
Weight | (g/m2) :2 . 1±0 . 1 |
Storage conditions | Storeina clean and dry environment,away from direct |
storage temperature | 25±5ºC. |
1.This product has arelease back film with a thickness of 175ìm;
2.It is recommended to use ultrasonic spraying,decal,and other methods to
produce MEA;
3.Do not use physical chemical grinding or other methods to polish the surface
of PEM;
4.Do not use solvents or solutions for soaking treatment during the production
of MEA;
5.The activation time of product is between 24h and 72h,and the best
performance canbeac hieved;
can ship sigle piece or bulk quantity in roll
A national high-tech enterprise specializing in the industrialization of perfluorinated PEM.
The only company in China that mass-produces perfluorinated proton membranes for flow energy storage
batteries, has completed the localization of imported DuPont membranes, and has a market share of more
than 70% of flow fuel cell proton membranes, establishing a leading edge.
Our core product anion exchange membrane is widely used in AEM electrolyzer hydrogen production, hydrogen fuel
cells, carbon dioxide reduction and other electrochemical equipment. As a solid electrolyte and isolation membrane
in electrochemical reactions, anion exchange membranes can selectively penetrate anions and block the penetration
of cations, electrons and gases. Series A membrane materials are characterized by high ionic conductivity (150 mS/cm,
OH, 80), high alkali stability (8,000+ h, 1 M KOH, 80C) and high mechanical strength (67 MPa stress, 117% strain).
China
R&D Centre - Suzhou & Guangzhou
Factories - Suzhou, Huaian & Guangzhou
Warehouse - Hong Kong
Divisions - Shenzhen / Xi'an
US
Branch Office:901 New Mesiter
Lane,Pflugerville,TX,78660
Warehouse:207 Allison Drive, Taylor, Texas 76754
European
1>Caen France: 11 Rue Charles Sauria 14123 ifs
Antoine Gin +33 64 80 68 81 8
2>Florence Italy:
Suppliers with verified business licenses