Fuel Cell Power Supply DC-DC Module Mini DC-DC Power Supply Module Adjustable 48V Hydrogen Module System

• Customization: Available
• Regenerative Type: Radiation Type
• Indirect Type: Reforming Type
• Model NO.: YFBKT8OV30A
• Electrolyte: SOFC
• Working Temperature: <100°C
• Fuel Type: Hydrogen Oxygen Fuel Cell
• Generation: SOFC
• Solutions: Direct Type
• Wide Input: DC 10-75V
• Output: DC 3-75V
• Size: 105*65*21mm
• Weight: 185g
• Transport Package: Package
• Origin: Cn
• Production Capacity: 5000PCS/Year

Product Description

 

wide input	DC 10-75V
OUT PUT	DC 3-75V
SIZE	105*65*21MM

Product Description

In the continuous price increase, there is a bulk demand for 60V MOS with a withstand voltage of less than 60V to save costs.

Notice:
1. Do not use 3A/5A DC regulated power supply as input to test the power supply
2. Please have certain power test and measurement capabilities and equipment, do not use the laboratory 3A adjustable regulated power supply to test this power supply
3. Do not use the CC mode of the electronic load to test the current-limiting power supply

The output current adjustment range means:If the input power is sufficient, if the output power is 20V, and a 0.4Ω resistor is connected to adjust the CC potentiometer, the output current can only be adjusted in a range from a minimum to a maximum of 50A, but cannot be adjusted to the minimum limit value (except 0A)

8705 stable parallel version, single board design
This module recommends using parameters:
The input voltage is within 75V (the limit has been tested to input 85V), and the output voltage is within 75V. Input and output current within 32A.

The maximum input current is 40A. It is not recommended to use the maximum current for a long time, especially in the high boost ratio mode, and good heat dissipation must be ensured.

Input and output positive and negative poles must not be reversed, otherwise it will burn without free warrantyPotentiometer life is relatively limited, do not advocate frequent adjustment.